Concrete Sealing in Sydney

Concrete sealing will protect your concrete from surface damage, corrosion, and staining by blocking the pores in the concrete to reduce the absorption of water and salts.

There are two type of concrete sealers: penetrating sealers and film forming sealers.

Penetrating sealers

These type of densifiers not only strengthen the concrete floor, but they also provide you with a hygiene floor. Moreover, They’re designed to block moisture, chemicals, salts, and stains while maintaining the natural look and feel of the concrete. 

One needs to bear in mind that this type of sealer is invisible, so it does not have gloss or colour by itself. They are also breathable.

There are many types of penetrating concrete sealers and they can be chosen based on the desired surface and concrete conditions.

Since they do not react with UV and are UV resistant by nature, they area perfect choice of outdoor.

To top it all off, their long-lasting protection of about 5-10 years, make them an ideal choice for high-traffic areas, too.

Best Uses:

  • Driveways

  • Garage floors

  • Walkways and patios

  • Exposed aggregate

  • Natural stone and masonry

  • Industrial and commercial concrete slabs

Film Forming Concrete Sealers

Film-forming concrete sealers are coatings that sit on the surface of concrete and create a protective film or layer, rather than penetrating into the concrete.

These sealers enhance appearance, add durability, and protect against moisture, stains, chemicals, and wear.

They also have many types. The most common ones are acrylic concrete sealers, polyurethane sealers and epoxy sealers.  

Acrylic Concrete Sealers

The most common and cost effective type. 

They are usually a single-pack product and have great UV resistance.  

They are quick drying products, so the turn over time for the project is very fast. 

On the down side, their life span is very short and needs to be re-applied every 1-3 years.

concrete-sealing-Sydney-prep-work-stages

Polyurethane Sealers

These sealers are far more durable and costly.

They are usually a two-pack product and have great UV resistancy. So they do not turn yellow. 

They are also a quick drying products, so the turn over time for the project is very fast. 

Their life span is is around 5 years and up to 10 years and they can be matt, semi gloss and even ultra high gloss. 

Epoxy Sealers

These sealers are extremely durable and can form a very hard, non-breathable coatings on the surface.

They are a two-pack product and have a weak UV resistance. So they are not a proper candidate for outdoor applications. 

Their life span is is around 5-10 years and they are usually gloss. 

The water-based epoxy sealers are quite common for apartment basements, industrial settings, and commercial car parks.

 The table below summerises both types properties:

Feature Film-Forming Penetrating
Appearance Glossy/satin/matte finish Natural look (no sheen)
Protection Type Surface protection Subsurface protection
Breathability Less breathable Breathable
Durability Moderate to high (depends) High (especially silane/siloxane)
Best Use Decorative, indoor/outdoor Exterior, structural, porous

Why is Concrete Sealing Important?

Concrete sealing in Sydney is important to retain the longevity of your floors. It helps to save your concrete floors from all sorts of damage because:

  • It can eliminate mould – If your concrete floors are not properly sealed, moisture can become absorbed in the concrete, creating the perfect environment for mould and bacteria. However, moisture is unable to penetrate the sealant, preventing the growth of both of these and keeping your floors clean and looking great.
  • It’s durable – A sealed concrete floor will prevent cracking, scaling, and other damages caused by age. No matter how much your concrete floors are used, they’ll stay stronger for longer simply by sealing them.
  • It’s long-lasting – Sealing your concrete increases its life span and makes sure it lasts significantly longer than it otherwise would. Sealants can sometimes increase lifespan by up to 25 years.
  • It protects your floors – High-quality concrete sealers in Sydney can protect your floors from a variety of different problems, from oil spills to UV rays and changes in the weather. All of these are often the cause of damage in unsealed concrete floors.
  • It maintains its colour – Anything can fade when it’s exposed to the sun for too long, but by sealing your concrete, you can be assured that it will stay the same colour as when it was first sealed. This keeps it looking clean and attractive for a much longer period of time.
  • It’s quick and easy – The process isn’t too time-consuming so you can access all of these benefits with a fast turnaround.

Need Concrete Floor Sealing in Sydney? Contact Us Today!

For Sydney concrete sealing, Epoxy Floor Tech is here to help. Our epoxy flooring Sydney services are trusted by companies such as Cochlear and KFC. We know how to fit great quality flooring, sealing and concrete resurfacing. So, give us a call and we’ll answer all of your questions. We look forward to hearing from you.

Arrange a FREE on-site consultation today

Epoxy Flooring Tech specializes in installing a diverse range of seamless floors. Our specialists are trained to assist you in finding the best option that suits your needs. If you have a flooring project for which you need pricing, please let us know, and we will gladly provide you with a quote.


Enquiry (02) 9188 8878
TELL US ABOUT YOUR

NEXT PROJECT

Office Phone: (02) 9446 1922